MB Stone Care MB-10 Spray Buffing Solution CASE
- Guide & Resources
- Product Videos
For the maintenance of MB-8 Polymeric Heavy Duty Polish Preserver
12 Quarts per Case
Also available as Individual Quart. Click HERE for more Information.
MB-10 IS THE TEAMMATE OF OUR BREAKTHROUGH PRODUCT, MB-8 POLYMERIC POLISHED STONE PRESERVER. It is used as a spray-buff product to repair the damages and to help refurbish the normal wear created by foot traffic on the MB-8. It is highly slip resistant. If the floor under care by the “team” MB-8 and MB-10 is maintained properly (which includes the use of our floor cleaner, MB-1) and with the recommended frequency, it means it will never need to be stripped!
DIRECTIONS: After dust mopping (or vacuuming) the floor, damp mop it (or machine-scrub it) with a solution of water with our MB-1 Marble, Granite & More Floor Cleaner using the correct mixing proportions (as indicated on the back-label of the product). Once the floor is dry, spray a mist of MB-10 over an area of approximately 50 square feet (4-5 m2) and buff it while still wet using a high-speed burnishing floor machine (1500 RPM rec.) with a proper polishing pad (natural hog-hair pads are recommended, though not necessary). Repeat until the whole floor has been restored. This procedure should be implemented on a daily frequency basis in the most traffic-intense areas, such as doorways, front-desk counters, elevators doors, etc. (make reference to the DIRECTIONS printed on the back label of our MB-8). The final result should be a perfectly shiny and uniform surface, with no “orange-peel” effect or burnishing marks. If swirl-marks are detectable, spray some additional MB-10 over the affected area and burnish immediately while still wet.
IMPORTANT NOTICE: The directions above are for “average” situations. Should your individual situation not allow for the daily maintenance routine, feel free to contact us.
WARNING! CAUSES EYE IRRITATION. Keep out of reach of children. Avoid contact with eyes. Wash thoroughly after handling.
FIRST AID: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If irritation persists, call a physician. If swallowed drink plenty of water and call a physician immediately.
IN CASE OF EMERGENCY MAKE REFERENCE TO THIS PRODUCT’S MSDS