Additional Information

Site Information

Shop Our Brands
 Loading... Please wait...
  • Image 1

Write a Review

Klenztone 1

Product Details :
10.00 LBS
Calculated at checkout
  • Description
  • Details
  • Reviews
  • Guide & Resources
  • Product Videos

Product Description


KLENZTONE-1 Restoration Stone Cleaner is designed for the hardest to clean masonry surfaces, such as Limestone, Sandstone, Concrete, and Exposed Aggregate. It makes old buildings, driveways, sidewalks, building entrances and even transit platforms look like new again. KLENZTONE-1 cleans grease and oil so effectively, it's ideal for warehouse, factory, garage or your home. Use before applying new sealer. WILL NOT REMOVE PAINT OR SEALERS FROM SURFACE.


APPLICATION: Easy to Use KLENZTONE-1 comes ready to use. All you do is apply it, give it time to work and rinse with water. KLENZTONE does the cleaning, and because any formula of it can dry on the surfaces KLENZTONE-1 is recommended for cleaning without harm, there is no hurry rinsing it off.  (Before using KLENZTONE, on the surfaces that KLENZTONE-1 is recommended to clean, you must do a patch test.)

1) Brush, roll or spray KLENZTONE on to a dry surface, thoroughly wetting it.

2) Allow KLENZTONE time to work, leaving it on at least as long as your patch test.

3) Rinse the loosened grime from the surface using water. This can be done in a manner of different ways. However, on the very dirty exterior surfaces KLENZTONE-1 is used to clean, a pressure washer is usually the easiest, most convenient way to do the work.

Spraying on KLENZTONE: Spraying is a perfectly good way of applying KLENZTONE; however, it must be done in a wet, soaking fashion, taking care to avoid wind drift. A pump up sprayer or low pressure electric prep pump (50 to 60 psi), outfitted with a saturation nozzle (fan shaped spray) works best for this operation. Do not run KLENZTONE downstream through a pressure washer, because this dilutes it, nor by applying it with a low-pressure airless sprayer, because they atomize solutions.


COVERAGE: 150 - 250 sq. ft. per gallon, depending on the porosity of the surface.


Safety:  Wear rubber gloves and safety goggles, when handling KLENZTONE, and ventilate enclosed areas. If KLENZTONE gets on skin or into eyes, rinse immediately with water. See Material Safety Data Sheet for more detailed hazard evaluation and safety information.


Environmentally Safe KLENZTONE is readily biodegradable and releases no V.O.C.s. When used properly, it poses no threat to the environment. Dispose of all wastes safely according to federal, state and local regulations.


Storage/Shelf Life: Keep containers sealed when not in use to prevent the salts from crystallizing. Maintain product at a minimum temperature of 50° F. Though its appearance darkens over time, the material will keep as long as it is not allowed to crystallize.


Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!


satisfaction guarantee


buy with confidence