This pad holder is 5 inches in width and weighs in at 5 lbs. We recommend using this when sanding, honing or polishing marble, limestone, travertine, onyx or any of the softer stone surfaces. This weight will allow the user to refinish these materials with ease, greatly reducing user fatigue.
KPS Cobra HD Drive Pads
$235.00
Description
Specifications
Helpful Guides
Reviews
Introducing the KPS Cobra HD Series of weighted drive pads for top polishing Marble, Granite, Quartz, Quartzite, Concrete and many other hard surfaces.
Why the need for a ‘Weighted’ drive pad? Very simple. Weight creates downward pressure on the cutting discs, allowing for a faster, more consistent cut and at the same time greatly reducing the pressure you need to exert through your shoulders and arms.
This principle has been proven now for many years on floor machines used for cutting hard stone floors like granite. Without added weight, the floor machine will not cut the granite aggressively enough and the refinishing process would take much longer. To compensate for this, weighted drive pads were developed, along with the ability to add extra weight on top of the machine. This made a huge difference for the end user.
If weighted drive pads greatly improve the refinishing process on floor machines, why would the same principle not apply to hand machines?
5 lb Drive Pad
This pad holder is 5 inches in width and weighs in at 5 lbs. We recommend using this when sanding, honing or polishing marble, limestone, travertine, onyx or any of the softer stone surfaces. This weight will allow the user to refinish these materials with ease, greatly reducing user fatigue.
10 lb Drive Pad
This pad holder is 5 inches in width and weighs in at 10 lbs. We recommend using this when sanding, honing or polishing granite, quartz, quartzite, concrete or any of the harder stone surfaces. Normally, when refinishing these materials, the user must exert a tremendous amount of pressure through the shoulders and arms which is very exhausting. This weight will allow the user to refinish these materials much easier, greatly reducing user fatigue. Most of the time you only need one hand to move the machine around.
5/8-11 thread. M14 adapter needed if using a M14 tool.
Available in 5 lb and 10 lb.
| Weight | 5.0 lb10.0 lb |
Guides
Items You May Like
Subscribe to Our Newsletter
© 2019 MB Stone Care & Supply LLC. Built by Mission Disrupt. All Rights Reserved.
