Super Shield Wipes Kit for Glass
- Guide & Resources
- Product Videos
Super Shield Wipes Kit for Glass includes MB-28 Step 1 and MB-30 Step 2. Each product is ready to use, in a resealable pouch containing 2 cloths.
Additional option available to purchase the MB-30 Step 2 separately
MB-28 Super Shield Step 1 is a cutting edge professional sealing kit for use on glass and mirrors. This super phobic product repels oils, water and other hard to remove residues by chemically reacting with silica, forming a covalent bond to prevent staining, corrosion, oxidation, mold and mildew. Approximate coverage is 50-70 square feet of surface.
Directions: All surfaces should be newly restored before applying Super Shield Step 1. This would involve using a stone scrub, such as MB-26 Stain Scrub or other mild abrasive cleaning agent to ensure the surface is thoroughly cleaned and free of all debris before sealing.
Apply Step 1 liberally to glass paying special attention to areas that are used more frequently and where water constantly touches. For mirrors- follow the pre-sealing cleaning instructions above but apply Step 1 in a thin layer this surface does not require a thick application.
Wear gloves. Rub the wipe in a circular motion over the surface to ensure complete coverageover a small area at a time. Allow the product to stand on the surface for 2 minutes. Repeat this process (if needed), then buff to a shine with
a microfiber cloth. Let dry and apply Step 2. Do not use on floors.
MB-30 Super Shield Step 2 provides a protective coating that enhances the durability and performance of Step 1. This product provides a highly durable, long-lasting protective coating by bonding to the surface molecular structure of materials such as glass. It will not alter the natural appearance of the surface. MB-30 is UV resistant and inhibits the growth of pathogens. Can be used as a stand-alone product or in combination with Step 1. After application of Step 2 the treated surface is highly resistant to corrosion, oxidation and staining. Minor scratching and abrasion is reduced and surfaces are easy to clean and maintain with MB-5 or MB-23 spray cleaners.
Directions: Wear Gloves. Apply immediately after Step 1 to a clean dry surface. Rub the Super Shield cloth in a circular motion over the surface to ensure complete coverage over a small area at a time. Allow the product to stand on the surface for 2 minutes. Repeat this process (if needed), then buff to a shine with a microfiber cloth. Do not use on floors.
To increase the longevity of this sealer, do not use acidic or abrasive cleaners after application.
Maintain with MB-5 Marble, Granite and More Spray Cleaner or MB-23 Easy Oxy Multi-Surface Cleaner
CAUTION: Do not inhale. Use in a well ventilated area.
EYE IRRITANT: Flush eyes with water. If irritation persists, seek medical attention.
SKIN CONTACT: Wash with soap and water.
IF SWALLOWED: Do not induce vomiting. Seek medical attention.
KEEP OUT OF REACH OF CHILDREN.
An exclusive product of MB Stone Care, LLC. USA