Epoxy Residue Remover
About the Product
Guide
Reviews
Technical Data
Data Sheets
Epoxy Residue Remover and Epoxy Grout Remover
Epoxy Residue Remover is an alkaline-based cleaner specifically developed to remove residues and films from grouting and sealing operations carried out using seals or epoxy-based products, quickly and easily.
The product can be used for end-of-installation cleaning as well as to remove film or stains caused through incorrect or lack of cleaning once installation has been finished. Epoxy Residue Remover is also extremely effective on epoxy residues that have been there for some time.
Epoxy Residue Remover acts quickly and easily, even when used on surfaces that are particularly difficult to clean, such as low-thickness materials or those with a micro-textured surface finish.
Its mild but effective formula makes it ideal for use on acid-sensitive surfaces since it will not cause corrosion or aggression. Epoxy Residue Remover is also particularly effective for the removal
Product Features
- Formulation: Alkaline cleaner specifically designed for removing epoxy grout and epoxy residues.
- High Extractive Action: Effectively targets and removes stubborn synthetic residues.
- Quick Action: Rapidly dissolves residues and films left from epoxy-based grouting and sealing.
- Versatile Application: Suitable for both indoor and outdoor surfaces.
Product Benefits
- Efficient Cleaning: Removes not only epoxy residues but also other stubborn materials such as graffiti, paint, and enamels.
- Wide Range of Compatibility: Safe for various materials including marble, concrete, terracotta, and more.
- User-Friendly: Ready to use right out of the bottle, simplifying the cleaning process.
- Professional Quality: Developed with expertise to ensure effective removal of tough residues.
Recommended Surface Types
EPOXY RESIDUE REMOVER is suitable for a variety of surfaces, including:
- Marble-Cement Agglomerate
- Marble-Resin Agglomerate
- Marble-Quartz Agglomerate
- Slate
- Sandstone
- Basaltina Lava Stone
- Concrete
- Craquelé Ceramics
- Glazed Ceramics
- Cotto
- Granite
- Natural and Textured Porcelain Tiles
- Limestone
- Reconstituted Stone (Eco Stone)
- Porphyry
- Quarzite
- Terracotta
- Travertine
- Tuff
Coverage Information
Each liter covers approximately 10 to 15 square meters, depending on the surface type and condition.
Safety Information
Personal Protective Equipment
Always use appropriate personal safety gear during application.
General Precautions
- Do not apply on wet or overheated surfaces.
- Wait for grouts or adhesives to cure completely before application.
- Avoid mixing with other chemicals unless specified.
- Protect adjoining surfaces not intended for treatment.
Storage
Keep the container tightly closed and store in a cool, dry place.
Always consult the product’s safety data sheet for detailed safety information and ensure proper handling at all times.
The following guidelines are average. Different stones may require different techniques. This product is no substitute for professionalism. If in doubt, don’t hesitate to contact us at (888) 509-5831.
***Product is ready to use. NEVER mix with other chemicals***
**Note to use the product on a dry surface**
Preparation:
- Do not apply Epoxy Residue Remover on heated or wet surfaces
- Make sure to thoroughly clean the surface removing all dirt and dust from the surface
- All surfaces close by that are not to be treated must be protected
- Test in an inconspicuous area first
Directions:
- Shake well before use.
- Pour the product straight onto the surface being treated (1 tsp per 5sf).
- Use a white pad between 150-200 rpm making circular motions.
- Continue buffing until the section is dry.
- Move to your next section and repeat steps 2 and 3 for that section.
- Once all the sections are complete, remove any residue with a dry/damp cloth, vacuum, or broom.
Note that more worn surfaces may require multiple applications per section.
For more detailed instructions, tips, and tricks, please see the Tech Sheet on the Data Sheets tab above.
| Technical Information | Details |
|---|---|
| Product Name | Epoxy Residue Remover (Made Ready to Use) |
| Technical Rating (1-Easy, 5-Difficult) | ★ |
| Best Used On | Most natural stones, including marble, and other hard surfaces (test first). |
| Application Method | Apply, dwell, and rinse. |
| Applicator | N/A |
| Coverage | Depends on the surface area to be cleaned. |
| Available Sizes | Liter. |
| Developer | Faber® |