Shimmer Brightener & Sealer
$29.97
Description
Specifications
Helpful Guides
Reviews
Shimmer Brightener & Sealer
Shimmer is a concentrated, non-acidic formula used after the final polishing stage on natural stone. This unique formula acts as a rinsing agent, optical brightener and hydrophobic sealer. Shimmer will remove polishing residue and leave the polished surface clean and residue free. It will also get rid of the notorious shoe squeak on highly polished floors.
Shimmer is recommended for use after polishing marble, travertine, limestone and granite. Surfaces may be polished with polishing powder, crystallized, synthetic fiber pads, or mechanically. Shimmer can be used on all horizontal and vertical surfaces to get rid of post-polishing film and residue, and leaves the surface smooth to the touch. NOT RECOMMENDED FOR USE ON HONED OR TEXTURED SURFACES. Intended for use on polished natural stone floors only.
Directions for use:
After the final polishing step is complete, mix 1 ounce of Shimmer per gallon of water into the machine's water tank, or into a bucket. Scrub floor with a soft nylon brush or clean white polishing pad to break up residue. Allow to stand for 30 seconds before vacuuming. Vacuum all liquid from floor thoroughly. Any light streaks seen during the vacuuming step should dissipate, leaving a film-free surface. In some instances with porous stone, like limestone, moisture within the stone can evaporate afterwards and may need to be lightly buffed with a dry, clean white pad. If product is overused, allow to dry and buff any residue with a clean dry white pad.
Available in concentrated quart or gallon size.
Weight | 2.0 lb9.0 lb |
Guides