CleanSpace™ Power System Accessories

CleanSpace™ Power System Accessories

Special Order Item. Call 888-509-5831 to order. Each item sold separately.

CleanSpace™ CST Half Mask with non-fabric harness – available in small, medium or large sizes – made of soft silicone that readily molds to the face and does not cause allergic dermatitis. The easy to locate clips secure the half mask to the power unit. It attaches easily to connection points on the mask arms and can be removed for cleaning.

CleanSpace™ CST Full Mask – available in small or medium/large sizes – clips to the power unit and provides respiratory, face and eye protection. It is comprised of an outer visor, inner mask and a five-point harness to evenly support the mask and power unit and provide ease of movement.

• Visor: Scratch-resistant and solvent-resistant coating
• Wide panoramic visor
• Silicone cushion seals to the face for optimum protection and comfort
• Recommended for applications where face protection and eye protection is required
• Suitable for long periods of wear
• Mylar speech diaphragm for clear communication
• Positive pressure airflow prevents fogging
• Inner mask has a unique clip-in/clip-out design and is easily removed for cleaning
• Built in adaptor/sampling port for CNC Quantitative Fit Testing

CleanSpace™ Full Face Mask Tear Off Visor Anti-Scratch Protectors (10 pack) – Available in Clear or Tinted – a disposable protective film that adheres to the visor of the CleanSpace™ Full Face Mask to provide limited protection to the visor. They can be layered and removed individually during a worktask to maintain a clear field of vision in high dust environments. The protector is designed to be used with the full range of CleanSpace™ Full Face Mask. The tinted film also reduces glare from distracting sunlight.

CleanSpace™ CST High Efficiency (HE) Particulate Filter (3 Pack) – suitable for protection against airborne particulates (dust, mites, fumes) with a particulate filtration efficiency ≥ 99.97%. These are high capacity filters, compatible with the CleanSpace™ Pro Power Unit, the CleanSpace™ Ultra Power Unit or the CleanSpace™ Work Power Unit. CleanSpace™ CST Filters are enabled to collect filter usage data which can be accessed via the CleanSpace™ Smart App.

Convenient to use: Filter and filter cover integrated into a single item, easy to fit and remover from the power unit using snap in/snap out clips, no required filter adaptor needed.

Fitted with a near-field communication chip: collects and transfers filter usage data to the CleanSpace™ Smart App via the power unit firmware. Operating the power unit without a filter will trigger an alarm in the power unit. The CleanSpace™ Smart App will display a filter absent notification. An expiry date is programmed into each filter. An alarm sounds when the filter has expired. The CleanSpace™ Smart App will display a filter expired notification.

CleanSpace™ CST Combined Filter – NIOSH HE + Nuisance Orders – CleanSpace™ CST High Efficiency (HE) Filters are a NIOSH approved particulate filter. The layer of activated multi-gas carbon provides Nuisance level relief from Cyclohexane, Sulfur Dioxide, Chlorine, Hydrogen Sulfide, Ammonia and Formaldehyde. NIOSH does not evaluate the effectiveness of Nuisance Odor Filters for the removal of Nuisance Odors. If used against Formaldehyde, this filter must be disposed of at the end of every shift.

Note: These filters are suitable for nuisance level exposure not exceeding OSHA Pel. 

• Compact
• Clip easily and directly into the CleanSpace™ ULTRA Power Unit
• Compatible with the CleanSpace™ ULTRA configured with a CleanSpace™ Half Face Mask and Full Face Mask. No adaptor is required
• CleanSpace™ CST Filters are enabled to collect filter usage data which can be accessed via the CleanSpace™ Smart App
• Convenient to use: Filter and filter cover integrated into a single item, easy to fit and remove from the power unit using snap in/snap out clips, no required filter adaptor needed
• Fitted with a near-field communication chip: collects and transfers filter usage data to the CleanSpace™ Smart App via the power unit firmware

CleanSpace™ Particulate Pre-Filter Coverall (20 pk) – a disposable cover that protects the CleanSpace™ power unit. It is also designed to remove course particles and provide limited protection against splashes (e.g. water, paint, cement, etc.).

The coverall is designed to be used with the full range of CleanSpace™ respirators (fitted with standard or high capacity filters). The particulate pre-filter coverall should be changed after each use. 

*Not waterproof and should be replaced if they come into contact with water. One time use only. Please call to order.