GuidesStone Care Guides
How to Remove Residue and Film from Grouting
Epoxy Residue Remover is a cleaner used to clean and remove residue and film from grouting surfaces. It's effective and cleans very fast. Grouting and film cause cloudiness to appear. This is not soap scum and occurs when the tiled surfaces aren't cleaned properly.
These residues are synthetic residues like other stubborn residues such as paints. Grout and film are common in kitchens, workshops, and construction environments. Some factors need to be considered before removing grout or film. In this article, we will discuss how to remove them by using Epoxy Residue Remover.
1. Factors to Think Over Before Removing the Grout or Film
Determine if the film or stain is epoxy-based or not. This will help to determine which residue remover to use. If you cannot determine whether it's epoxy-based or not, you can contact the manufacturer.
Determine the tile's material. The cleaner used must be compatible with the material to avoid damaging or destroying them. Tiles made with smooth ceramic can be cleaned with acidic cleaners such as vinegar.
2. Steps Needed When Removing Grout or Film Using Epoxy Residue Remover
Make a solution following the instructions given on the Epoxy Residue Remover label. Following the instructions make the solution more effective when using it and helps to avoid wasting.
After making the solution, apply it to the tiles and scrub using the brush. Scrub it thoroughly to ensure that you dislodge the epoxy residue from the tiles. Do this several times and ensure that the surface is clean. Use a heavy sponge to clean the suspended resins.
Furthermore, you can use silica sand to remove stubborn films and stains. However, it is important to test it first before using it because some tiles may tarnish. After following the process, rinse with plenty of water. It will help to evaluate any remaining stains and ensure that suspended grout and film don't stick again when the surface dries.
3. Removing A Fully Cured Epoxy
Removing an epoxy grout or film that has taken a long time to form is a hustle and sometimes costly. The same factors should be considered when removing stains, whether it's after installation or it has taken longer to form. Epoxy Residue Remover works well if it is appropriately applied. Some chemicals can be used as you wish, but caution must be taken.
The Epoxy Residue Remover must be applied carefully and given some time to soften the films and grouts before they are removed. Allowing it to settle for about 10 minutes will be good. You can use a brush or cleaning pad to dislodge the grouts after they have softened. Wipe all the grout carefully to avoid it sticking again. If the area is large, you can opt to use a rotary floor polisher.
Epoxy Residue Remover can be used to clean joints, sealing, and hard surfaces that may not be easy to clean. It can be used immediately after construction or renovation and will be effective.
Caution must be taken when using this cleaning substance because some are acidic, and others are alkaline. Such products are harmful to our health if swallowed or exposed to our skins. If by any chance you come into contact with these cleaning substances, clean with a lot of water, and if you swallow by mistake, seek medical advice.
Moreover, ensure that you don't pollute the environment by carelessly throwing away the waste product from these cleaning products. These waste products are either acidic or alkaline, which harms the soil and water bodies.
Conclusion
Cleaning grouts and film may pose a challenge. However, with the right cleaning substance, such as Epoxy Residue Remover, it becomes easy to clean. This Epoxy Residue Remover is mild, making it possible to clean acidic surfaces because it doesn't cause corrosion. It is suitable for the removal of all types of grouts and stains like synthetic residues, including stubborn ones like graffiti and paints.
